Extra Large 20W PIR Solar Security Floodlight with Remote Control

• Surface mount: Attach solar light with lag bolts
• Post mount: Bracket to fixture housing, slide fixture housing over pipe then tight to desired height and position.
• turn the light to "ON" position by pressing down the power button.

• Solar Panel: Mono Crystalline
• Battery: LiFePO4 battery pack 12.8V 12AH
• LED Lamp: 20W LED 6000K
• Charge Time: 8 Hours under peak sunshine
• Power Button: push down = Auto/on. Push upspring = off. Push power button down after lights are installed.
• Infrared Sensor: sensor distance - 5-10M. detect angle - < 140

• Power button: ON/OFF
• + LED - : Dimmer
• Work Mode: T1, T2, T3, M1, M2, M3.

• T1:Bright mode for 90 secs
• T2: Bright mode for 180 secs
• T3: Bright mode for 240 secs

• M1: Low power stand by, turn on bright mode (1300 lumen) when motion sensed
• M2: Turn on until motion sensed (2500 lumen)
• M3: Low power (300 lumen) till no power

• Height: 3-5M
• Distance between lights: 12-20M

• Prevent the solar panel being covered by buildings or tress all year.
• The battery may go flat and the lighting does not last long when you first get it because of the battery self-discharge during test, stock, transportation. In this case please turn off the switch and put the solar panel to recharge battery under the sun 1 or 2 days, then install and push the power switch on, it will work normally.
• When the ambient temperature rises close to the human body temperature, the detection distance will be shortened.
• the total lighting time is based on full sunlight and ideal placement of light. in winter or on cloudy days the ideal lighting time may be affected.
• Please do not open or repair the product by yourself with out the technique support of professional engineer or manufacturer.

Dimensions:

Weight: