MOTION SENSOR LIGHTS
Our Magnetic Shipping Container Motion Sensor Light, are ideal for use in all types of storage containers. With an extra-strong magnet strip included on the back, these shipping container lights will stick and hold to your container roof, allowing for super easy and safe installation. These lights will also help save a small fortune versus fitted electrics. They also include a ‘3M’ sticky back strip if being used on aluminium containers (or the cupboard under the stairs!) Being very diverse these really can be used for any type of storage solution needing light. Our shipping container lights come fitted with a 120-degree motion sensor that will be activated from 10ft/3metres away from the light. This light puts out enough light to help you safely navigate through an otherwise dark shipping container.
Features:
- Magnetic Fix and Easy to Install
- We recommend 1 lighting unit per 10 feet of the container.
- When in any motion sensory mode they auto turn off with motion for 18-20 seconds
- 120-degree sensing range
- LED light with low consumption 2400mAh lithium rechargeable battery
- Expected battery life 2 – 6 months depending on usage
How to re-charge:
Recharge via micro USB in 4–6 hours. With efficient LED technology, a standard battery lasts 3+ months with light use (1–3 times per day for a few minutes).
Unlike costly £500+ electrical setups, these lights provide an affordable, easy-to-install alternative—just attach them to a metal surface, no drilling or wiring needed. To recharge, simply remove the light or use a portable USB power bank for convenience.
3 MOTION SENSOR MODES:
Our motion sensor lights for shipping container are very easy to set up and have 3 primary sensor modes:
1) Always On Mode (providing a constant steady light as a torch) To activate turn on the light holding in the button in for 1-2 seconds.
2) Motion & Light Sensor Mode (Auto switches on when detecting motion in darkness): To activate turn on the light by pressing and releasing the button for less than 1 second. The light indicator will flash green to confirm Motion & Light Sensor Mode is on
3) Motion Sensor Only Mode (Auto switches on/off in darkness and bright places): To activate, when the light is already in Motion & Light Sensor Mode press and release the button for less than 1 second again. The light indicator will flash red to confirm Motion Sensor Only Mode is on.
