Shipping container paint is an essential item for keeping shipping containers clean and properly branded. These paints must be tough, easy to use, and long-lasting.

Hi-Build 46410 is a high-build coating that dries quickly and has good colour retention as a flat finish. The product is based on acrylic resin and a non-chlorinated plasticizer. This product contains zinc phosphate. The product is resistant to water, oil splashes, and hydrocarbons from animal and vegetable oils. Recommended use:

As a primer, intermediate or finishing coat in a moderately corrosive environment.
As a finishing coat for containers.

Application

Preparation of New Steel: To begin with, remove oil and grease etc. thoroughly with a suitable detergent. Secondly, remove salts and other contaminants by high-pressure fresh water cleaning. Additionally, abrasive blasting to the cleaning degree specified for the final coating system, usually Sa 2½ (ISO 8501-1:2007). Finally, apply immediately after cleaning. Preparation For Repair and Maintenance: Initially, remove oil and grease etc. thoroughly with a suitable detergent. Secondly, remove salts and other contaminants by high-pressure fresh water cleaning. Following this, remove all rust and lose material by abrasive blasting or power tool cleaning. Afterwards, dust off residues. Last but not the least, touch up bare spots to full film thickness. Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation.

About us: Quickfit Container Accessories

We specialise in the sale and distribution of shipping container accessories and modifications. Purchase your shipping container paint now.

Please don’t forget to check our other products. Click here for more options. We are also available on eBay and Amazon.
If you have any questions, please call us on 0208 398 8441 or email us at sales@quickfitcontaineraccessories.co.uk.

Paint

Filters

Shipping Container Paint

Compare products