SHIPPING CONTAINER SINGLE DOOR

These shipping container personnel doors have been designed purposely for the shipping container manufacture and conversion industry. PU foam insulation, a fully welded frame and sealed joints make for a stiff, rigid door set ready for easy installation when welding into a shipping container. An increased tolerance has been factored in to allow for movement in the shipping container when in transit or when a shipping container is positioned on an uneven surface. Please be advised the industry standard for fitting container doors is with a goalpost or some kind of frame. If you require one of these, before placing an order for the door, please contact us via email and we can try source one for you.

CHECK OUT OUR DOOR INSTALLATION VIDEO

Finish

Wet sprayed with a grey primer finish, our doors are prepped to take your final paint coat on-site. We recommend painting within 24 hours of installation.

Construction

Manufactured with 1mm galvanised steel door skins and 2mm galvanised steel frames.

Insulation

Insulated with polyurethane foam (also known as PU foam), the door leaf AND frame are injected with PU foam for superior insulation values and improved strength and rigidity.

Internal reinforcements

A full subframe, weld mesh, door closer reinforcing plate and additional corner struts are welded inside the door for additional strength and integrity.

Locking System

The trademark Genuine HOOPLY® multi-point locking system is installed in our container doors. The locking system is also protected with 2mm lock boxes and stainless steel tubes to protect the connecting rods. An adjustable latch keep is integrated into the strike plate and lock box to allow for on-site adjustments.

DDA Compliant Threshold

This door complies with the Disability Discrimination Act by having a level threshold with a maximum upstand of only 12mm with chamfered edges. The threshold is manufactured from stainless steel.

ANTI-VANDAL

Not your standard security door

These anti vandal container doors have been engineered purposely for this industry, making it unique and very different to other doors in our other ranges. PU foam insulation, a fully welded frame and sealed joints make for a stiff, rigid door set for easy installation when welding into a shipping container. Compared to the standard ranges, an increased tolerance has been factored in to allow for movement in the shipping container when in transit, or for when it is positioned on an uneven surface.

Finish

Wet sprayed with a grey primer finish, the paint has been designed to take your final paint coat on-site. We recommend painting within 24 hours of install.

Construction

Manufactured with 1mm galvanised steel door skins and 2mm galvanised frames, this particular door has a 3mm thick astragal welded to the latching side and top of the door for additional security.

Insulation

Insulated with polyurethane foam (also known as PU foam), the door leaf AND frame are injected with PU foam for superior insulation values and improved strength and rigidity.

Internal reinforcements

A full subframe, weld mesh, door closer reinforcing plate and additional corner struts are welded inside the door for additional strength and integrity.

Locking System

The trademark Genuine HOOPLY® multi point locking system is integrated into the container personnel doors. The locking system is protected with 2mm lock boxes and stainless steel tubes to protect the connecting rods. An adjustable latch keep is integrated to the strike plate and lock box, to allow for on-site adjustments.

Stainless Steel Threshold

This door has a stepped threshold, standing approximately 35mm tall. The threshold is manufactured from stainless steel.

Products

Filters

Shipping Container Single Door

Compare products